Participating machines

These machines are eligible for the Rogiers 2026 Trade-up Days

Atla Coop Itaca

De Atla Coop Itaca is een automatische hoekenpers voor aluminium raam- en deurprofielen, gekenmerkt door een hoge betrouwbaarheid en robuustheid. Ideaal voor het snel en nauwkeurig persen van de hoekverbindingen bij hoge productievolumes, met een eenvoudig instelbare cyclus en een stevige constructie voor langdurig industrieel gebruik.

Comall Quota Alu GB

De Comall Quota Alu GB is een gemotoriseerde rollenbaan met geïntegreerd meetsysteem, beschikbaar in lengtes van 3, 4,2 en 5 meter. Ideaal om profielen (aluminium, PVC, hout) snel en nauwkeurig op maat aan te voeren naar een zaagmachine of bewerkingscentrum, met een display voor de operator en een duurzame constructie voor dagelijks gebruik in productieomgevingen.

FOM Alva 50

De FOM Alva 50 is een zaagmachine met voorblad en pneumatisch gestuurde kopkanteling. Uitgerust met een hardmetalen zaagblad Ø 500 mm en verkrijgbaar in 3 lengtes, ideaal voor het op maat zagen van aluminium- en PVC-profielen in verstek.

FOM Mistral 200

De FOM Mistral 200 is een T-frees met variabele hoekinstelling en volautomatische freescyclus. Variabele spilsnelheid van 4.000 tot 7.000 rpm, integraal gesloten tunnel voor maximale geluidsreductie, gepatenteerd positioneringssysteem voor het profiel zonder hulpstukken, magazijn voor 9 freesgroepen met snelwisselsysteem en microdrup smering met pure olie. Max. gereedschapsdiameter 200 mm.

FOM Panda 400

Eénkops zaagmachine met opkomend widia zaagblad diameter 400 mm en manuele hoekinstelling van de verticale as (0° tot 180°). Uitgerust met 2 horizontale en 2 verticale klemmen, regelbare olieverneveling van het snijgereedschap, integrale bescherming van het zaagblad en een voorziening voor de afzuiging van bramen en nevel.

iVision Extrusion 160

De iVision Extrusion 160 is een krachtige industriële stofzuiger voor het opvangen van metaal- en PVC-krullen aan de zijde van zaagmachines en bewerkingscentra voor aluminium- en PVC-profielen. Compacte, mobiele opstelling met turbine en filtersysteem voor continu gebruik in productie, geschikt om droog én met snijolie gemengd spaan efficiënt af te voeren.

Plasticband Neleo 50

De Plasticband Neleo 50 is een technologisch geavanceerde, veelzijdige en veilige foliewikkelmachine, ontworpen voor het verpakken van o.a. aluminium profielen, rolluiken, schappen en meubelspakketten. Origineel systeem met dubbele spoel (patent Plasticband) voor verpakken zonder beperkingen, en optioneel automatische foliesnijder, klem en rollenbanen.

Sarmax Cheyenne SP2-SP4

The Sarmax Cheyenne SP2 600 is a brushing machine with 2 heads for ageing wooden elements such as boards, profiles, beams and floorboards (max. width 600 mm). The machine features two independent brushing groups — a steel brush for roughing and a silicon-carbide brush for finishing — with adjustable feed and brushing speeds for a perfect ageing effect.

SCM Class F 520

Jointer with high-performance operation, practical, safe and ergonomic. Fitted with an overhead control panel, wood-removal readout and, as standard, a concave/convex planing system for a perfect joint. Integrated bridge guard on the cutter block (exclusive SCM solution).

SCM Class S 630

Thicknesser combining simplicity, precision and a wide range of applications. Electronically variable feed speed via inverter from 4 to 20 m/min, vertical movement of the thicknesser table on 4 steel screws, helical grooved steel infeed roller and two rubber-covered outfeed rollers at the top.

SCM Class SI 400

The SCM Class SI 400 is a manual sliding table saw with a 400 mm blade. Maximum torsional rigidity and total absence of vibrations thanks to the closed-loop saw unit, and manual movements that stay user-friendly and precise thanks to the fully dust-protected gearbox.

SCM Class SI 400 EP

The SCM Class SI 400 EP is a programmed sliding table saw with tiltable 400 mm blade that meets every requirement. The roller wagon with arc-shaped hardened steel guides (SCM patent) ensures lasting high cutting quality, and the electronic control with 4″ LCD colour screen makes programming your work simple and efficient.

SCM Class SI 400 EP BladeOff

This new SCM safety system protects the operator against any possible contact with the saw blade. A detection system senses when the operator’s hand enters the danger zone: the Blade Off system activates before contact occurs and the blade retracts under the table at high speed — without damaging the machine.

SCM Class TF 130 / TF 130E

Spindle moulder with vertical spindle and work table 1200×730 mm. Manual (TF 130) or electronic (TF 130E) movement of the tool-holder shaft with mechanical or digital readout. Rotation speeds 3500-10,000 rpm, profiling tools up to Ø 250 mm. Optional MK5 interchangeable spindle with “T-SET” quick lock.

SCM Class TI 120 / 120E

Precise and reliable spindle moulder thanks to powered lifting and tilting of the spindle with electronic digital readout on the front. Mechanical programming with digital readout to 0.1 mm for positioning of the two tables — no more test runs. Optional “Flex” system for fast access to the spindle.

SCM Class TI 145 EP

Spindle moulder with tiltable spindle (-45° to +45°) and tools up to 300 x 82 mm. Standard fence with mechanical programming for total travel based on tool diameter, sectioned “FAST” table with manual adjustment, and electronic “READY” control (2 to 3 axes selectable).

SCM DMC SD 10

The SCM DMC SD 10 is the perfect automatic sanding machine for small and medium-sized companies for calibrating and fine-sanding solid wood and panels. Working width 950 mm, feed speed 4.5-9 m/min and working thickness 4-170 mm. Fitted with automatic panel detection and a diamond-profile conveyor belt for maximum stability and a compact footprint.

SCM DMC SD 30-60-90 (uitvoering SD 30)

The SCM DMC SD 30 is a wide-belt calibrating and sanding machine for medium-sized companies with 950 mm working widths. With MESAR sectioned elastic or electronic pads and a wide range of units (planing units, rollers, controlled pads, finishing units), a perfect finish is guaranteed on lacquered, solid and veneered panels.

SCM DMC SD 30-60-90 (uitvoering SD 60)

The SCM DMC SD 60 is a wide-belt calibrating and sanding machine that guarantees maximum performance for medium to large companies. A wide range of units (planing units, rollers, controlled pads, finishing units) delivers a perfect finish on any type of panel — lacquered, solid or veneered. Optional Multifunction Roller Unit quick-change system for even more versatility.

SCM L’invincibile F 7

Jointer delivering constant precision over time. Fitted with a device for concave/convex work with readout on the ruler and memory stops, an additional folding fence for narrow pieces, motorised movement of the infeed table, sound-dampening protection against knife ejection and an overhead control panel.

SCM L’invincibile FS 7

Combined jointer-thicknesser offering a tailor-made solution. Electronic control panel with LCD screen and keyboard for entering dimensions, hour counter, calculator and 99 programmes. Stainless steel finish, 9 kW motor with automatic star-delta start, and simultaneously opening tables with a safety microswitch.

SCM L’invincibile S 7

Thicknesser for a perfect finish at any time. Electronically variable feed speed via inverter (4-20 m/min), automatic adjustment based on motor consumption, vertical movement of the thicknesser table on 4 steel screws and helical grooved steel infeed roller. Comes standard with the electronic “READY” control (up to 99 working programmes).

SCM L’invincibile SI X

The exclusive SCM L’invincibile SI X performs the most complex operations with maximum precision. Very high cutting quality thanks to the roller wagon structure with hardened, ground steel guides. Simultaneous use of a 550 mm main blade and a 160 mm scoring blade, and the “Easy Touch” control guides the operator step by step.

SCM L’invincibile TI 5

Spindle moulder with electronically tiltable spindle and direct-drive electrospindle for perfect precision and vibration-free running. Less maintenance than belt-driven systems, and optional HSK63 quick tool-change with dual “air jet” system and tool detection for a 75% time saving at setup.

SCM Minimax CU 300C

The SCM Minimax CU 300C is the universal combined machine for DIYers and workshops, with excellent value for money. Perfectly suited for sawing solid wood as well as panels (even veneered) thanks to the saw unit with blade up to Ø 315 mm and optional scoring unit, plus a 270 mm sliding table and a large squaring frame (960 x 600 mm).

SCM Minimax CU 410E

Combined machine with a closed cast-iron saw unit (100 mm cutting height, blade up to 315 mm) and a large cast-iron milling column for vibration-free work. Thicknesser table with Ø 87 mm cutter block (3 knives) and two feed speeds (6-12 m/min), for stability, rigidity and a perfect finish.

SCM Minimax FS 41E

Combined jointer-thicknesser with 410 mm planing width and a total jointer table length of 2000 mm. Fitted with 2 feed speeds on the thicknesser and three-phase 4 (4.8)/50 (60) kW/Hz motors.

SCM Minimax LAB 300P

The SCM Minimax LAB 300P is a versatile, compact combined machine with the most advanced technological solutions in precision, reliability and safety. Guide carriage in anodised aluminium with a maximum stroke of 1600 mm running on high-precision hardened steel guides, and a spindle moulder fence with micrometric adjustment featuring vertical and horizontal hold-downs.

SCM Minimax SC 2C

The SCM Minimax SC 2C is a precise, budget-friendly and compact sliding table saw with tiltable blade for DIYers and smaller workshops. Work table 1020×325 mm and crosscut capacity up to 1600 mm. Excellent cutting of solid wood and panels (even veneered) thanks to the saw unit with blade up to Ø 315 mm and mounted scoring unit.

SCM Minimax SC 3C

The SCM Minimax SC 3C is a precise, budget-friendly and compact sliding table saw with tiltable blade for DIYers and smaller workshops. Work table 840×560 mm and crosscut capacity up to 2250 mm. Excellent cutting of solid wood and panels (even veneered) thanks to the saw unit with blade up to Ø 315 mm and mounted scoring unit.

SCM Minimax SC 4E

Sliding table saw with tiltable blade for the demanding craftsman combining accuracy, ease of use and cost savings. The new closed cast-iron saw unit is firmly supported under the table by two lateral supports for perfect cutting results. Optionally equipped with a scoring unit for flawless cutting of veneered and laminated panels.

SCM Minimax ST 3C

The SCM Minimax ST 3C is the perfect combined saw-spindle moulder for DIYers and smaller workshops looking for practical machines at excellent value. The saw unit with blade up to Ø 315 mm and mounted scoring unit cuts thick solid wood and panels (even veneered), and the spindle moulder guard with micrometric adjustment ensures safe, accurate machining.

SCM Minimax ST 4E

Combined saw-spindle moulder with a closed cast-iron saw unit, supported by two precision-ground Ø 120 mm guides for perfect cutting quality. Wide 360 mm sliding table and full cast-iron milling unit with 4 spindle speeds, for maximum stability under all working conditions.

SCM Minimax T 55ES

The SCM Minimax T 55ES is the ideal spindle moulder for the demanding professional thanks to its customisation and flexibility. Max. tool length 125 mm, rotation speed up to 10,000 rpm and max. profiling tool Ø 210 mm. Comes as standard with a micrometric-adjustment fence with vertical and horizontal hold-downs, and LED display of the milling speed.

SCM Nova F 410

Jointer with high-performance operation, practical, safe and ergonomic. Cutter block with counter knives and positioning marks, knife-setting gauge, and reading of the wood removal on a graduated scale. Fully vibration-free thanks to the large grooved cast-iron tables. Optional Tersa or Xylent cutter block.

SCM Nova FS 41

The SCM Nova FS 41 is a combined jointer-thicknesser with 410 mm useful working width, fast and easy to use in a very compact footprint. Manual movement of the jointer table via a parallelogram system on connecting rods, mechanical anti-tilt system and electronic digital readout of the working dimension on the thicknesser table.

SCM Nova FS 52

The SCM Nova FS 52 is a combined jointer-thicknesser with 520 mm useful working width, fast and easy to use in a very compact footprint. Manual movement of the jointer table via a parallelogram system on connecting rods, mechanical anti-tilt system and electronic digital readout of the working dimension on the thicknesser table.

SCM Nova S 520

Thicknesser combining simplicity, precision and a wide range of applications. Motorised lifting of the thicknesser table at 2 speeds with micrometric feed, electronic digital readout of the working height, and helical grooved steel infeed roller with rubber-covered outfeed roller. Optional Tersa or Xylent cutter block.

SCM Nova SI 40

Sliding table saw with tiltable blade, professional performance and uncompromised quality. Ideal for the craftsman looking to combine reliability and precision with an attractive price.

SCM Nova SI 400 EP

The SCM Nova SI 400 EP is a horizontal sliding table saw with excellent value for money. Comes as standard with the 2-axis Ready control that manages both the vertical and tilting movement of the saw group. The aluminium sliding table with 3200 mm useful cutting length runs on hardened, ground steel precision guides (SCM patent).

SCM Nova TF 110

Spindle moulder combining ease of use with productivity and flexibility. All movements are easily set via a handwheel with mechanical decimal readout on the front of the machine. Spindle moulder fence with mechanical programming and digital readout to 0.1 mm, rotation speeds up to 10,000 rpm and profiling tools up to Ø 250 mm.

SCM Nova TI 105

Tiltable spindle moulder combining ease of use with productivity, efficiency and flexibility. Manual movement of the tool-holder shaft with numerical indicator, rotation reversal with interlock for start-up, and rotation speeds from 3500 to 10,000 rpm. Optional “LL” version (table extensions up to 2500 mm) and “PS/PS Plus” (aluminium wagon).

Stomana KSM 2600

Compact edge sanding machine with oscillating sanding belt from the Stomana KSM range, for sanding straight workpieces and finishing edges. Fitted with an adjustable table and multiple sanding combinations for fast, accurate machining of solid wood and panels.

Stomana KSM 3000 S

Sanding machine with oscillating sanding belt and 4 sanding options: a sanding pad with adjustable infeed and outfeed guide (angle-adjustable sanding group), sanding against the belt from 90° to 45° for large surfaces, sanding table with mitre guide adjustable from -60° to +60°, and a second table with sanding drum for curved work.

Tornado SPB Cindy 400 RC

Top sanding machine / calibrating machine for fine finishing, also suitable for sanding assembled window frames (half-open side). Fitted with a fixed table, a height-adjustable sanding group, one type R group and one type C group, a 1900 mm sanding belt and infrared belt oscillation. Available in different sanding group combinations (R / C / RC / RR).

Volpato LBK 150

The Volpato LBK 150 is a high-performance sanding machine with an oscillating sanding belt (2640 x 150 mm) and a tiltable work table of 950 x 300 mm. The oscillation runs independently of the sanding group, delivering a quality finish without clogging the belt. Supplied as standard with a complete set of sanding rollers Ø 25/30/35/40/45/50 mm.

Book Your Visit

Personal Information